Proto – 30″ Aligning Pry bar J2125

#ad
Stanley Proto J2125 #ad - Proto - 30" Aligning Pry bar J2125 #ad - 3/4-inch shank width. 30-inch overall length. 7/8-inch tip width. 7/8-inch top width 7/8-inch shank width 30-inch overall length. Stanley j2125 proto 30-inch aligning Pry Bar Application: for prying, positioning and aligning applications. Application: for prying, positioning and aligning applications.

#ad



RudedogUSA- Set Of Three 7/8" Sleever Bar Lockwasher & Grommet

#ad
RudedogUSA #ad -
#ad



Rudedog 7/8 Lockcollar & Grommet 1

#ad
RudedogUSA #ad - Rudedog 7/8 Lockcollar & Grommet 1 #ad - Fits a 7/8 round sleever Bar Does not fit a Hexagonal Sleever Bar. Sleever Bar Lockwasher & grommet.

#ad



Klein Tools 5416TFR Bolt Bag, Flame Resistant Canvas Bag for Bolt Storage with Double Bottom and Tunnel Loop, 9-Inch

#ad
Klein - Geneva Supply 5416TFR #ad - Klein Tools 5416TFR Bolt Bag, Flame Resistant Canvas Bag for Bolt Storage with Double Bottom and Tunnel Loop, 9-Inch #ad - Features convenient tunnel loop for sliding over your belt. Fits a 7/8 round sleever Bar Does not fit a Hexagonal Sleever Bar. Tunnel loop for sliding over belt. For added protection in the field, Klein's flame-retardant canvas bolt bag is made of flame-resistant No. Assembled in usa of U. S. Flame retardant, hard-leather bottom.

. Sleever Bar Lockwasher & grommet. The hard leather bottom is flame retardant meeting the performance requirements of NFPA-701. And imported components. Meets the performance requirement of NFPA -701. 4 canvas.

#ad



Stanley Proto J2120 Proto 18" Aligning Pry Bar

#ad
Stanley Proto J2120 #ad - Stanley Proto J2120 Proto 18" Aligning Pry Bar #ad - Made in USA. Assembled in usa of U. S. 5/8-inch shank width. And imported components. Fits a 7/8 round sleever Bar Does not fit a Hexagonal Sleever Bar. Tunnel loop for sliding over belt. Flame retardant, hard-leather bottom. Sleever Bar Lockwasher & grommet. Meets the performance requirement of NFPA -701. 5/8-inch tip width 5/8-inch shank width 18-inch overall length.

Stanley j2120 proto 18-inch aligning Pry Bar Application: for prying, positioning and aligning applications. Application: for prying, positioning and aligning applications. 5/8-inch tip width. 18-inch overall length.

#ad



Spud Wrench 3/4-Inch Bolt for Heavy Nut Klein Tools 3212

#ad
Klein Klein 3212 #ad - Forged from select alloy steel to withstand high-leverage and heavy loads. Extra heavy-duty head area gives maximum strength and durability. Nominal opening: 1-1/4-Inch 31. 8 mm. Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding. Nominal opening: 1-1/4-Inch 31.

Spud Wrench 3/4-Inch Bolt for Heavy Nut Klein Tools 3212 #ad - 8 mm. Application: for prying, positioning and aligning applications. 18-inch overall length. This wrench features an extra-heavy-duty head area to provide excellent strength. Meets the performance requirement of NFPA -701. Fits a 7/8 round sleever Bar Does not fit a Hexagonal Sleever Bar. American Bridge design.

5/8-inch tip width. Forged from select alloy steel to withstand high-leverage and heavy loads. 5/8-inch shank width. The klein tools 3/4-inch alloy steel Heavy-Nut Wrench is forged from select alloy steel to withstand high-leverage and heavy loads. Assembled in usa of U. S. Sleever Bar Lockwasher & grommet.

#ad



13in.L x 1 1/4in. Top Dia. 5/16in. Point Dia. - Ironton Broad Head Bull Pin

#ad
Ironton #ad - 5/8-inch shank width. Application: for prying, positioning and aligning applications. Assembled in usa of U. S. Forged, heat-treated bull pin increases efficiency by providing a larger striking surface. Long, even taper reduces binding and hang-up. Material type: Carbon steel, Tool Length in. 13, pieces qty. 1 sleever Bar Lockwasher & grommet.

13in.L x 1 1/4in. Top Dia. 5/16in. Point Dia. - Ironton Broad Head Bull Pin #ad - Nominal opening: 1-1/4-Inch 31. 8 mm. Meets the performance requirement of NFPA -701. 5/8-inch tip width. Fits a 7/8 round sleever Bar Does not fit a Hexagonal Sleever Bar. Made of #45 carbon steel. Tunnel loop for sliding over belt. Angled head and smooth blending of radii increases strength and reduces danger of chipping.

18-inch overall length. Flame retardant, hard-leather bottom. And imported components. Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding. Head design reduces chance of pin slipping from hand when aligning holes.

#ad



RudedogUSA Sleever Bar Holder Original Version

#ad
RudedogUSA #ad - 5/8-inch shank width. Made in USA. Long, even taper reduces binding and hang-up. Extra heavy-duty head area gives maximum strength and durability. Catalog number, bolt size and nominal opening size are stamped on every wrench for easy identification. Forged from select alloy steel to withstand high-leverage and heavy loads.

RudedogUSA Sleever Bar Holder Original Version #ad - Head design reduces chance of pin slipping from hand when aligning holes. Meets the performance requirement of NFPA -701. Rudedog premium black Leather Sleever Bar Holder Sleever Bar Lockwasher & grommet. Flame retardant, hard-leather bottom. Made of #45 carbon steel. Nominal opening: 1-1/4-Inch 31. 8 mm. Application: for prying, positioning and aligning applications.

18-inch overall length. Angled head and smooth blending of radii increases strength and reduces danger of chipping. Assembled in usa of U. S. Holds sleever bars.

#ad



Ironton Broad Head Bull Pin - 10in.L x 1 1/16in. Top Dia. 1/4in. Point Dia.

#ad
Ironton #ad - Catalog number, bolt size and nominal opening size are stamped on every wrench for easy identification. Long, even taper reduces binding and hang-up. Leather. 5/8-inch tip width. The ironton broad head Bull Pin is ideal for aligning bolt holes when working with steel construction. Flame retardant, hard-leather bottom.

Ironton Broad Head Bull Pin - 10in.L x 1 1/16in. Top Dia. 1/4in. Point Dia. #ad - Head design reduces chance of pin slipping from hand when aligning holes. Pieces qty. 1, material type: Carbon steel, Tool Length in. 10 sleever Bar Lockwasher & grommet. Broad head design resists mushrooming, providing longer tool life than conventional designs. Assembled in usa of U. S. Application: for prying, positioning and aligning applications.

Made in USA. 5/8-inch shank width. Fits a 7/8 round sleever Bar Does not fit a Hexagonal Sleever Bar. Made of #45 carbon steel. Tunnel loop for sliding over belt.

#ad



Stanley Proto J2124 Proto 24-Inch Aligning Pry Bar

#ad
Stanley Proto J2124 #ad - 5/8-inch shank width. 18-inch overall length. 24-inch overall length. Sleever Bar Lockwasher & grommet. Long, even taper reduces binding and hang-up. Head design reduces chance of pin slipping from hand when aligning holes. Meets the performance requirement of NFPA -701. Catalog number, bolt size and nominal opening size are stamped on every wrench for easy identification.

Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding. Broad head design resists mushrooming, providing longer tool life than conventional designs. Leather. Made of #45 carbon steel. 3/4-inch shank width. And imported components. 5/8-inch tip width.

Stanley Proto J2124 Proto 24-Inch Aligning Pry Bar #ad - . Broad head design resists mushrooming, providing longer tool life than conventional designs. Application: for prying, positioning, and aligning applications. 3/4-inch tip width. Tunnel loop for sliding over belt.

#ad



Klein Tools 5459SLVR Connecting Bar Holder with Lock Collar

#ad
Klein - Geneva Supply 5459SLVR #ad - 3/4-inch shank width. Head design reduces chance of pin slipping from hand when aligning holes. Made of #45 carbon steel. Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding. Meets the performance requirement of NFPA -701. Made of #45 carbon steel.

Broad head design resists mushrooming, providing longer tool life than conventional designs. Long, even taper reduces binding and hang-up. Nos. Fits a 7/8 round sleever Bar Does not fit a Hexagonal Sleever Bar. 5/8-inch shank width. Broad head design resists mushrooming, providing longer tool life than conventional designs.

Klein Tools 5459SLVR Connecting Bar Holder with Lock Collar #ad - Made of leather. Forged from select alloy steel to withstand high-leverage and heavy loads. Extra heavy-duty head area gives maximum strength and durability. Made in the USA. Application: for prying, positioning and aligning applications. Application: for prying, positioning, and aligning applications. 3/4-inch tip width.

#ad