Top 10 Restaurant Exhaust Fan – Ranges, Ovens & Cooktops

As an Amazon Associate I earn from qualifying purchases.



2500 CFM NCA16FA, 1.5 HP 208 Volt Three Phase Motor, Restaurant Canopy Hood Grease Rated Exhaust Fan- Belt Drive Centrifugal Upblast Exhaust Fan- 28" Fan Base

CAPTIVE-AIRE #ad - Belt drive centrifugal upblast Exhaust Fan with disconnect switch and 18-3/4" wheel. Rated for restaurant grease and general ventilation applications.

Ul705, & ulc-s645 rated. Included with the exhaust fan is a restaurant duty grease cup, UL762, down spout, and a hinge kit for exhaust fan roof curbs.28" x 28" fan base dimension/ 158 lbs/ 2500 cfm/ 1. 50 hp 208 volt three Phase Motor. As all fans are custom built, no returns or exchanges are accepted. Construction features include a heavy gauge aluminum housing, a safety disconnect switch, a backward inclined, vibration isolators, non-overloading wheel, and quick release latches for motor compartment access.
ManufacturerCaptive Aire Systems #ad
Weight158 Pounds
Part NumberNCA16FA

2. HoodMart


700 CFM, 115 V, Single Phase, 1/10 HP, HoodMart 10D-700-FF High Speed Direct Drive Restaurant Exhaust Fan

HoodMart #ad - Heavy-gauge aluminum housing, Aluminum curb cap, Quick release hood latches. Conduit post through windband, Integral drain hole, Motor bearings are permanently lubricated. Direct drive exhaust fan with variable speed control, Recommended for hood sizes 3-foot to 4-foot, Compatible with curb 12-inch by 12-inch. Made in usa, 1-year warranty, fans are code compliant and are Listed UL762 for restaurant applications. Exhaust fan features: 700 cfm @ 05 sp, 1/10 hp, 1 phase, 115 v, disconnect switch - Weather resistant enclosure.
BrandHoodMart #ad
ManufacturerNaks, Inc. -- Dropship #ad
Height24 Inches
Length24 Inches
Weight34 Pounds
Width21 Inches
Part Number10D-700-FF
Warranty1-Year Warranty



VBENLEM Set of 6 Restaurant Hood Filter 19.5W x 15.5H Inch 430 Stainless Steel Hood Filter with 5 Grooves Range Hood Filter for Commercial Kitchen

VBENLEM #ad - Convenient installation- a handle is equipped on each side of the filter for easy installation and replacement of the grease filter. Easy to clean and environmentally friendly with low maintenance cost. Hassle-free usage- grease holes are evenly distributed on both sides.

Advanced quality- made of 430 stainless steel. The stainless steel sturdy filter is suitable for the restaurants featuring an open kitchen design. Size: 19. 5w x 15. 5h inch please note that the mounting direction is fixed and cannot be reversed. The grease does not get stuck easily, grilling, this stainless steel grease filter holds up to daily flame cooking, and the holes are not easily plugged. Water, rust and deformation proof.

Efficient performance- these high-quality stainless steel baffles with 5 collection troughs, and then enter the drain. 94% average grease removal efficency tested at 300 FPM, and frying. Wide application- applicable to the filters of commercial range hoods and baffle range hoods. Provide 100% flame shield for preventing extreme fires from entering the exhaust hood, will cause the air to change direction and collect to form grease, roofing pipes, etc.
BrandVBENLEM #ad
ManufacturerVBENLEM #ad
Part NumberVBENLEM

4. Fantech


Direct Drive, Fantech 5DDU106A Roof/Wall Fan Upblast Centrifugal Vent, 1 Ph, 10", ODP, 1/20 hp, 115V

Fantech #ad - All ventilators are listed UL 706. Backward inclined aluminum fan wheel. Inlet temperatures up to 170°F.
BrandFantech #ad
ManufacturerFantech #ad
Weight37 Pounds
Part Number5DDU106A



Commercial Kitchen Restaurant Duty Exhaust Hood, and 10” Round Exhaust Riser 4' Long Hood, Wall Canopy Stainless Steel Exhaust Hood with Baffle Hood Filters, High Temperature Light Fixtures

SUN AIR #ad - Includes stainless steel grease baffle filters with handles, and a grease cup. Manufactured in the usa. As all hoods are custom built, no returns or exchanges are accepted. Technical support available upon purchase.

4ft 0" long x 48” deep x 24” high stainless steel exhaust-only wall canopy Hood with Built-in 3" Back Standoff and a Factory Installed 10” Round Exhaust Riser. One year warranty. Complies with UL710 . Listed and built in accordance with NFPA 96,. Meets all code requirements in North America. Designed for customers who care about quality, pre-wired high temperature light fixtures, aesthetics, and affordability.

Hood has a 600 degree temperature rating which can accommodate medium to heavy duty cooking equipment such as ranges, griddles, fryers, and ovens. Exhaust fan and fire suppression system not included. Etl listed to US and Canadian safety standards. Constructed of 430 stainless steel where exposed.
BrandSUN AIR #ad
ManufacturerSUN AIR #ad
Weight210 Pounds
Part Number4824 Hood

6. Cosmo


Dual Motor, 4 Speed Exhaust, Kitchen Stove Vent, Permanent Filter, 48 inch, Cosmo COS-18U48 Under Cabinet Range Hood 1000 CFM Ductless Convertible Duct, Fan Timer, LED light, Stainless Steel, 48

Cosmo #ad - Electrical requirements: 120 / 60Hz, 3-Prong Plug. 5 year limited parts: our customer support team is based proudly in the usa. Duct size: 10". 9" h. Powerful, energy-efficient lights: the energy-efficient, 3-watt leds are long-lasting and provide bright, high lumen LED lighting for better visibility at night.

Easy to clean filters: cosmo arc-flow Stainless Steel Permanent Filters are dishwasher-safe and extremely durable, for easy maintenance and cost savings. Contemporary modern design: blends seamlessly with other stainless steel kitchen appliances for modern home makeovers. Made of premium 430 grade, 16-Gauge thickness stainless steel. Powerful yet quiet: 1000 cfm with 4-speed fan, twin centrifugal motors and touch controls, Cosmo’s vent hood quickly ventilates your kitchen without the noise of competing range hoods. Product Dimensions: 47. 9" w x 25" d x 17.
BrandCosmo #ad
ManufacturerCosmo #ad
Height17.9 Inches
Length25 Inches
Weight102 Pounds
Width47.9 Inches
Part NumberCOS-18U48



High Temperature Gasketing for Restaurant Canopy Hood Exhaust Fan 50 foot Roll

CAPTIVE-AIRE #ad - Rated for 1500 degrees Fahrenheit. To be used for applying between the exhaust fan base and the grease duct. Gasket is a high strength, flexible, durable material ideal for commercial kitchen exhaust applications. Woven from industrial grade, asbestos free ceramic fibers. 50 foot roll of 1/4" x 1" adhesive backed woven ceranmic tape gasket.
ManufacturerCaptive Aire Systems #ad
Weight9 Pounds
Part Number397-91PSA

8. iLiving


ILiving 10 Inch Variable Speed Wall Mounted Steel Shutter Exhaust Fan 2 Pack

iLiving #ad - Corrosion-resistant with OSHA compliant wire guards. Ul listed with speed controllable, permanently lubricated motor. Specifications:. 10-inch variable speed Shutter Exhaust Fan with automatic shutters. Galvanized steel frame with aluminum shutters and fan blades for long lasting durability.
BrandiLiving #ad
ManufactureriLIVING #ad
Height0 Inches
Length0 Inches
Weight0 Pounds
Width0 Inches



Grease Box for Restaurant Canopy Hood Exhaust Fan Includes Down Spout

CAPTIVE-AIRE #ad - 18 gauge Aluminized Metal. Grease cup for kitchen-duty centrifugal exhaust fans, Box Dimensions 17-1/8 Long X 5-1/16 Wide X 3-3/4 High. One gallon volume per NFPA96. Prevents grease buildup on rooftop.
ManufacturerCaptive Aire Systems #ad
Weight2 Pounds
Part NumberGC-CUF



Economy Make Up Air Unit EMUA Non-Motorized Gravity Vent EMUA10

CAPTIVE-AIRE #ad - Can be used anywhere fresh air is needed to replace exhaust air, commercial kitchens, laundries, warehouses, office buildings, locker rooms, foundries, bakeries, factories, etc.750 cfm against Static Resistance. It is an economical choice when a fresh air intake or pressure relief is needed. Can be roof or wall mounted. Spun aluminum housing for rust free weather resistant durability. Roof curb/ wall mount bracket not included. This economy make-up air unit is a non-motorized gravity vent.
ManufacturerCaptive Aire Systems #ad
Weight28 Pounds
Part NumberEMUA